Feed machinery

1. Widely used in the cooling industry in the feed industry. It is suitable for the cooling of various pellet feeds, such as pellet feeds, expansion feeds, tabletting feeds and other pellet feeds.
2. Vertical overall layout, simple and beautiful appearance;
3. Advanced counter-current cooling principle, adopting a reciprocating linear movement discharge fence type discharge mechanism, the discharge is smooth, and the discharge amount is uniform;
4. The cooling bin with an octagonal cross section removes the cooling dead corners, which is beneficial to the cooling treatment of the material;
5. The new type of rotary spreader ensures that the material is sufficiently uniformly and thoroughly cooled and can significantly reduce the crushing rate. The cloth range is adjustable and the power consumption is small;
6. The upper part of the discharging mechanism is equipped with several pressure reducing plates, which can greatly improve the working load of the discharging mechanism, reduce deformation and prolong the service life of components;
7. The transmission device uses a reduction motor to drive the eccentric shaft, which is stable, reliable, low noise, and easy to install and maintain;
8. After cooling, the feed chamber is not higher than room temperature + 5 ℃, and the water removal rate is not lower than 3.8%, which prolongs the storage time of high-quality pellet feed;
9. There is an access door on the front of the equipment to facilitate daily maintenance and repair. There are several observation windows on the side and the top cover to facilitate the observation of the equipment operation.